NÜO Clas

The combined access terminal Biometrics + Proximity

Maximum resistance, careful design...

NÜO readers are made of high-quality polycarbonates, the bright surface of the reader has an extra hard coating that will keep your colors bright for a long time.

BIOMETRIC READER

High resolution capacitive fingerprint sensor, 508dpi, with self-learning system.

PROXIMITY READER

High security proximity reader for contactless cards 13.56 MHz, MIFARE Plus®, MIFARE® DESFire® EV1, MIFARE® Classic and MIFARE Ultralight®.

POWER SAVE

Ignition is automatic by approach infrared detection to save energy in addition to extend the life of the reader.

TOUCH SCREEN

High Resolution Color 2.4” touch screen with total visibility both indoors and outdoors to sunlight.

ANTI BACTERIA

Surface finishing with antibacterial treatment to prevent generation of germs on the contact surface of the reader.

NÜO
Clas

Total flexibility...

All possible combinations...

Reader combo, biometrics + Proximity

CARD

FINGERPRINT

CARD + FINGERPRINT

CARD OR FINGERPRINT

FINGERPRINT IN CARD

VIP CARD

Biometrics + Proximity

All NÜO biometric readers have incorporated the maximum security card reader MIFARE Plus®, because we understand that it is just not an option.

With the combined biometric readers and NÜO cards, you can get all combinations: CARD, FINGERPRINT, CARD OR FINGERPRINT, CARD + FINGERPRINT, FINGERPRINT IN CARD AND VIP CARD.

The most versatile and flexible reader in the market, able to read fingerprint plus high-security cards MIFARE® and combine both.

NÜO
Clas

Maximum security Biometric Reader

High capacitive sliding technology fingerprint sensor with 508dpi resolution, with self-learning system with two patterns per user, one of the initial enrollment and one that changes and improves as the reader is used.

Capacity of Users
100 users 1:N
100 users in CARD + FINGERPRINT mode
Unlimited users in FINGERPRINT IN CARD mode

Times
Verification time 1:1 less than 0.5 s.
Identification time 1:20 less than 1 s.
Identification time 1:50 less than 1.5 s.
Mechanical resistance for more than 20,000,000 readings

Cutting-edge cards

NÜO Clas readers are prepared to work with the new maximum security cards MIFARE Plus® meeting the highest safety requirements.

The communication between the reader and the cards is done using authentication and data encryption with high-security AES and 3DES encryption algorithms.

Proximity cards supported native MIFARE Plus® for all NÜO access control systems on demand: MIFARE® Classic, MIFARE Ultralight® and MIFARE DESFire® EV1 and native NFC.

Compatibilities:

Regulations

CE: EN 60950-1, EN 301 489-1, EN 301 489-3, EN 300 330, EN 62479, EN 50364

FCC: 47 CFR part 15 sub-part C

ISO 14443 A and B - NFC MIFARE Emulation

MIFARE Plus® EV1 Certification: Common Criteria EAL5+ (CC EAL5+)

MIFARE Plus® EV1 data authentication and encryption: AES128 NIST FIPS PUB 197

Antibacterial treatment

Antibacterial treatment

In ByTech we take care of all the details of our products, even the smallest ones invisible to the eye. So our readers NÜO include an antibacterial finishing treatment.

The antibacterial finish ensures a maximum aseptic operation reader helping prevent contagion by contact and without affecting the user experience with the reader.

Since the finishing treatment is embedded and integrated into the material of the reader, the antibacterial effectiveness remains active and effective over time.

Important features:

- The treatment is applied during the manufacturing process of the material, ensuring homogeneity by not requiring additional steps in the assembly process.

- Efficacy of treatment is permanent and intrinsic to the manufacturing process of the material, so it does not require any special maintenance by the user.

- Antibacterial treatment is a physical surface feature in the reader on the contact zones with the skin and does not affect the functional characteristics of the reader.

- To clean the reader, it is very important to follow the instructions specified in the manual.

Technical data validation tests of the effectiveness of antibacterial finish

Bacterial specimens

Bacteria 1: Staphylococcus aureus (ATTC6538)
Bacteria 2: Escherichia coli (ATCC25922)

Verification procedures

Population growth material sample with antibacterial finish counting and comparison with reference growth without antibacterial finished material, in a time period of 24 hours at a temperature of 37 +/- 1ºC.

Applicable regulations

ASTM E 2149-2010 Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agent Under Dynamic Contact Conditions.

KS J 4206-2008 Testing methods for antibacterial activity of antibacterial functional products - Part 1: Shake flask method.

Effectiveness Results

Test Antibacterial

*Certifying Agencies: FITI Testing & Research Institute / SGS-CSTC Consumer Testing Services

The personal data you provide to us by filling in this form will be processed by BY TECHDESIGN, S.L., as the data controller of this website.

The purpose of collecting and processing the personal data we request will be to relate to you and be able to provide our services and respond to your enquiries or requests. The legitimacy is through the express consent of the data subject.

We store your data during our relationship and for as long as the applicable laws bind us. You may contact us at any time to find out what information we have about you, rectify it if it is incorrect and erase it once our relationship has concluded.

You may exercise your rights to access, rectification, restriction, portability and the erasure of data at arco@by.com.es. If you believe that your rights have been violated, you may file a claim with the Spanish Data Protection Agency (www.aepd.es).

You may consult additional and detailed information in our DISCLAIMER, and specifically in section 4 concerning the “Privacy Policy”.