BY Contact us
Need help?
Need help?

Access Control of Vehicles

BY logo

Controlling and managing vehicle access to restricted areas is increasingly necessary for both businesses and individuals.

Barriers

The use of barriers in an access control system to limit and monitor the passage of vehicles in restricted areas, such as car parks, garages company or private premises.

Barriers can be integrated into an access control system allowing passage only to authorized persons using proximity cards, remote controls, RFID vehicle identification number plate or through the reader NÜO Matrik.

Barrier B680H

B680H barrier with integrated green-red light at the top in a traffic light illumination mode. Springs “infinite life” with more than 2,000,000 cycles of continuous use without extraordinary maintenance.

The opening rate selected from 1.5 to 6 seconds.

Several mast sizes available.

Barrier B680H Vehicles Control

Automatic Barrier 615 Max.length 4 m post.

Electrohydraulic control unit with a lock in opening and closing, double-acting piston. Separate control opening and closing force by by-pass valves. Anti-crush safety device. Release device accessible from the outside by triangular key. Opening/closing 3 s. with mast 2.5 m and 8 s. with 4 m. 220 VAC motor power. Motor power 220W.Operational ambient temperature -20 ° C to 55 ° C.

617 Automatic Electromechanical Gate

617 C automatic electromechanical barrier incorporates electronic control box with a deceleration in closing and opening. The opening time between 4 and 8 s. Use frequency of 50%, between 130 and 225 cycles/hour. Supply voltage 220 VAC. Operating temperature -20°C to 55°C.

Automatic Barrier Vehicles Control

620 Quick and Super Quick Barrier

Barriers 620 with electro-hydraulic power with a lock in opening and closing. Separate control opening and closing force by by-pass valves. Anti-crush safety device. Release device accessible from the outside by triangular key. Slowdown during opening / closing. Opening/closing time 0.8/0.8 s super fast model and 4-8 s fast model. Cooling fan with automatic activation. 220 VAC motor power. Motor power 220W.Operational ambient temperature -20 ° C to 55 ° C.

640 Automatic Gate max.length 7 m mast.

Electrohydraulic automatic barrier for themaximumlength of the post 7 m. Electrohydraulic control unit with locking at opening and closing. Separate control opening and closing force by by-pass valves. Anti-crush safety device. Release device accessible from the outside by triangular key. Slowdown during opening / closing. Opening / closing of 4 to 8 s. Cooling fan with automatic activation. 220 VAC motor power. Motor power 220W.Operational ambient temperature -20 ° C to 55 ° C.

Quick and Super Quick Barrier Vehicles Control

642 Stainless Steel Quick Bar max. 4/7 m mast

Quick Bar 642 stainless steel. The model 642/40 allows a post up to 4m and 642/70 up to 7 m. Electrohydraulic control unit with locking at opening and closing. Separate control opening and closing force by by-pass valves. Anti-crush safety device. Release device accessible from the outside by triangular key. Slowdown during opening / closing. Opening / closing of 2 to 3 s. for the model 642/40 and 4 to 8 s. for the model 642/70. Cooling fan with automatic activation. 220 VAC motor power. Motor power 220W.Operational ambient temperature -20 ° C to 55 ° C.

Stainless Steel Quick Bar Vehicles Control

Accessories Gates

In By we have a full range of accessories for installation and maintenance of access control of vehicles. All kinds of masts of different sizes to suit all needs as well as different length skirts.

Bar Vehicles Control Gates

Automatic Bollards

Automatic bollards are designed to control access to public or private spaces, where you have to manage with limited traffic areas. By actuation of an opening system (remote control, proximity card, digital code, etc.), the automatic bollard retracts to the ground allowing vehicle access.

Automatic Bollards

Polished steel bollards, formed by thick steel cylinder 6 mm, Ø 275 mm and height 600 or 800mm, polyester powder coated with dark gray metallic color. It is equipped with a hydraulic power source integrated in the bollard and with a cable of 10 m length to connect to the external control equipment. Hydraulic activation, with approximate time of lift / lower of 9 s. It includes manual emergency release. It includes flashing lights and warning buzzer.

Available container automatic bollard in theheight of 600mm and 800mm.

Via Radio

Systems particularly suitable for vehicle monitoring units also from the outside, since they are able to remotely control the opening of the access, without having to get off the vehicle.

Plug Receiver 2 Channel 868 MHz

2-channel plug-in receiver.Open collector output with antenna and integrated encoder. Input filter to eliminate interference. Operating frequency 868 MHz.

Vehicle Control Plug Receiver 2 Channel 868 MHz

External receiver 868 MHz

External receiver, operating frequency of 868 MHz. Possibility to memorize 250 codes.

Power 12-24 VDC with consumption of 100 mA.

External receiver 868 MHz Vehicles Control

Plus Receiver 868 MHz with dipole antenna

Plus 868 MHz multichannel receivers with adipole antenna and separately integrated encoder. Input filter to eliminate interference. Operating frequency 868 MHz. Power 12/24 Vcc. Maximum number of channels 50. The degree of protection IP44.Operating temperature -20°C to 55°C.

Vehicle Control Plus Receiver 868 MHz with dipole antenna

Decoder SLH for Receiver 868 MHz

Decoder DS decoding card for 868 MHz receiver.Programming button. Relay output to manage electronic equipment and/or auxiliary drives. Memory capacity 1,000 codes.With LED indication.Power 12/24 Vcc. Operating temperature -20°C to 55°C.

Vehicle Control Decoder SLH for Receiver 868 MHz

Transmitter SLH XT - 868 MHz

Transmitter 868 MHz 2 or 4 channels.Rolling code.868 MHz operating frequency, with asignaling diode and lithium battery.Operating temperature -10°C to 55°C.

Transmitter SLH XT - 868 MHz Vehicles Control

Accessories for Control of Vehicles

Metal Mass Detector

Metal mass detector to detect the presence of vehicles in access control systems, doors, automatic gates, etc... It has two relays of presence or pulse. Power 12/24 V AC/DC Operating Temperature -30°C to 40°C.

Wireless Surface Photocell

The maximum capacity of 15 meters, obstacle detection time 40 m/s. It includes photocells (transmitter/receiver) and Battery 3V-CR2 for wireless operation. IP54 protection. Power 12 to 24 VDC, maximum consumption 30 mA